093/IDIT CDD Intake Kit (T04B/T04S/T04Z)
Free up space on top your engine while improving performance and mpg with our CDD intake kits. These kits are compatible with serpentine drive setups and 093/factory turbo kits. Comes with boots, clamps, aluminum coolant reservoir, CDR tube, Blue 6637 Donaldson air filter, waterproof prefilter and polished 4" thick walled aluminum piping.
To install this kit, simply remove your factory air box and coupler to the inlet of the turbo, along with the factory coolant reservoir, mounting the windshield washer reservoir up against the inside of the fender to make space for the filter behind the driver side battery. On some year models the two wires may need to be lengthened for the washer fluid pump. Next install the 90* coupler onto the inlet of the turbo pointing it towards the driver side, and install the 4" intake tube into the coupler with the CDR barb facing towards the CDR on the driver side valve cover. Install the filter onto the end of the 4" tube with the prefilter over the main filter, and rotate the main tubing bend for the best clearance of the accessories and hood, once in a satisfactory angle, install the support bracket for the main filter mounting it to the original base for the coolant reservoir. Install the CDR tube and clamps, making sure the whole assembly is tight and cannot rub any engine components, then locate a suitable location for the coolant reservoir. Depending on the body style truck, I have found the core support, radiator fan shroud mounting off the side of the radiator, inner fender wells all to be good locations to mount the reservoir using the supplied bracketry. Any questions on the install please contact Sales@classicdieseldesigns.com for support.