175cc (500hp) Big Bore .370" DB2 Injection Pump

  • $2,650.00
Shipping calculated at checkout.

Only -4 left!

The 175cc db2 is the next step in our performer series pumps(locked timing), built with our 5000 rpm governor spring, custom delivery valve, proprietary locked advance design, ported fill and discharge ports and our stroker cam ring, this .370" plunger sized db2 puts out over 200cc at peak fueling, and 175cc at 2800 rpm, capable of 500+hp.

This pump includes our proprietary In-Cab-Fueling-Controller (ICFC), which allows adjustment from inside the cab of total fueling (max power) as well as how aggressive the injection pump fuels (smoke control). This is done completely pneumatically, with no fuel plumbed into the cab, or any electronic controls to complicate the simplicity of mechanical injection.  This model requires a 125psi/150gph capable fuel system, check out our performance fuel systems for a plug & play solution.

Current lead time for any big bore pump is dependent on parts availability. Please contact us for more details.

All Classic Diesel Designs' DB2 injection pumps are built to and exceed oem specification. All pumps are built with a new advance piston, balanced metering valve to reduce side load and stickage issues, low lubricity spec tool steel blade set and transfer pump liner to reduce wear with modern dry diesel, high torque shutoff solenoid, viton material grade seals, updated delivery valve, delivery valve stop, and low lubricity grooved plungers.

See Stanadyne service bulletins: S.B 60R8, S.B.108RlO, S.B.125R5, S.B. 304R8 S.B. 334R1, S.B. 373R1.

A common issue with the design of the DB series rotary pump is rapid wear of the advance piston bore due to the hardened piston sliding in the aluminum bore quickly eroding the critical tolerance due to lack of lubricity of modern diesel fuel. Most cheaper rebuilds ream out this bore and fit a larger piston, but this is just a temporary fix and soon the hydraulic advance will be out of spec, resulting in a lack of power, high egts and a smokey exhaust.Our solution is to mill out this bore and install a ceramic sleeve. This ceramic sleeve allows us to create a better fit than with the original design, and shows no wear after over 100k miles, extending the lifespan of the pump, and maintaining the same out of box performance many years down the road.


We Also Recommend